T
                 
                 

LOT #1 QTY = 1

Wolfking Portable Stainless Steel Screw Conveyor, 16" Dia. X 14' Long screw, 24" W X 26" L hopper, 7' discharge, safety covers, 220 volts (Required Rigging Fee: $250 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #2 QTY = 1

Wolfking Mdl. C-250-UNI Stainless Steel Grinder, Ser. #M-80477, Mfg. 1995, stainless steel auger, barrel, bone collector, stainless steel parts carts, (6) plates, Yale chain hoist, control panel, 220 volts (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         
         
       
         

LOT #3 QTY = 1

Wolfking Stainless Steel Portable Screw Conveyor, 16" Dia. X 18' Long screw, 9' discharge, on swivel with power pivoting , 40" infeed, 220 volts (Required Rigging Fee: $350 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
         
         

LOT #5 QTY = 1

Mepaco Dual Shaft Ribbon Blender, 64" W X 93" L X 43" D tub, pneumatic front end discharge, 20 h.p. independent drives (Required Rigging Fee: $1,500 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com) Three door ways need to be widened for blender to be removed.

 
         
   
         

LOT #6 QTY = 1

Mepaco Dual Shaft Ribbon Blender, 64" W X 103" L X 43" D tub, pneumatic front end discharge, 20 h.p. independent drives (Required Rigging Fee: $1,500 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com) Three door ways need to be widened for blender to be removed.

 
         
         

LOT #7 QTY = 1

Stainless Steel Platform Between Blenders, 2' W X 9' L X 5' T , stainless steel grated tops, (5) stairs (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
         

LOT #11 QTY = 1

Stainless Steel Stuffing Table, 4' W X 7' L (Required Rigging Fee: $50 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #12 QTY = 1

Stainless Steel Vacuum Load Hopper with bucket loader, 10" outlet (Required Rigging Fee: $200 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
         

LOT #14 QTY = 1

Koch Stainless Steel Sink, foot pedal activated with knife sterilizer, soap & towel dispensers (Required Rigging Fee: $50 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #15 QTY = Lot

Lot (2) Stainless Steel Sinks, foot pedal activated with knife sterilizer, soap & towel dispensers (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

       
         

LOT #16 QTY = 1

Stiebel Eltron Tankless Hot Water Heater (Required Rigging Fee: $50 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #17 QTY = 1

Thomas Precision Portable Air Actuator (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #18 QTY = 1

Lot Foremans Desk & Toolbox (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

       
         

LOT #19 QTY = 1

Stainless Steel Stuffing Table, 57" W X 8' L (Required Rigging Fee: $50 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

       
         

LOT #20 QTY = 1

Leland Portable Dual Action Mixer, 19" W X 36" L 24" D tilt out tub (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #21 QTY = 1

Stainless Steel Vacuum Load Hopper with bucket loader, 10" outlet (Required Rigging Fee: $200 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
         

LOT #22 QTY = 1

Nowicki Stainless Steel Smoke Stick Washer, 24” diameter x 42 1/4” long drum (Required Rigging Fee: $200 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #24 QTY = 1

Stainless Steel Table with drain, 32" W X 36" L X 40" T (Required Rigging Fee: $50 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #25 QTY = 1

Stainless Steel Table, 44" W X 92" L X 35" T (Required Rigging Fee: $50 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #26 QTY = Lot

Lot (1) Stainless Steel Table, 30" W X 6' L, (1) 30" W X 8' L (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #27 QTY = 2

Stainless Steel Meat Trucks (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #28 QTY = 1

Nowicki Stainless Steel Smoke Stick Washer, 24” diameter x 42 1/4” long drum (Required Rigging Fee: $200 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #29 QTY = 1

Stainless Steel Table, 34" W X 6' L X 36" T (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #30 QTY = 9

Rubbermaid Plastic Spice Totes (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 

 

 

 
         

LOT #31 QTY = 1

Sperian Eye Wash Station (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #32 QTY = 1

Portable Stainless Steel Table, 24" W X 32" L X 30" T with vise (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #33 QTY = 2

Stainless Steel Meat Trucks, 29” wide x 58” long x 24” deep (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
 

LOT #34 QTY = 1

Stainless Steel Meat Truck, 29” wide x 58” long x 24” deep (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #35 QTY = 1

Pallet Jack (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #36 QTY = Lot

Lot (1) Werner 10' Fiberglass Step Ladder, (1) 8' Fiberglass Step Ladder (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #38 QTY = 1

Crown Pallet Jack (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #39 QTY = 1

Handtmann Type 226-01 Linker, Ser. #404, 460 volts with looper chain (Required Rigging Fee: $200 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
         

LOT #40 QTY = 1

3M Matic Mdl. A-20 Tape Machine, Ser. #51468, top & bottom tapers (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #41 QTY = 1

Supervac Vacuum Chamber Packager, single chamber, 44" L X 34" W X 8" D (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #42 QTY = 2

Stainless Steel Meat Trucks (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #43 QTY = 1

Key Mdl. 437965-1 Stainless Steel Vibratory Conveyor, Ser. #09-213147-1, 2' W X 8' L X 8" D (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #44 QTY = 1

Metalquimia Mdl. Pickle Injector, 12 needles, walking beam conveyor, 16" W X 5' L, stainless steel brine tank with filters (Required Rigging Fee: $350 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
         
         

LOT #45 QTY = 1

Stainless Steel Mix Tank, single wall, 4' Dia. X 68" D, 1 1/2" bottom outlet, 104" tall with framing (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

-  
         
       
         

LOT #46 QTY = 1

Stainless Steel Work Platform, 40" W X 18' L grated top & stairs, 102" T with handrails (Required Rigging Fee: $100 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #47 QTY = 1

Gunther Mdl. GPC2200K Stainless Steel Tumbler, Ser. #251137/BJ98, 400 volts, 3 phase, 6' Dia. X 4' L drum, touchscreen controls (Required Rigging Fee: $350 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
         
   
         

LOT #48 QTY = 1

AMFEC Mdl. 2-3K Portable Column Dumper, Ser. #060609, 440 volts, 3 phase, missing drive motor, screw driven (Required Rigging Fee: $350 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
         
   
         

LOT #49 QTY = 1

Lot (2) 400 Lb. Dump Buggies, (1) 600 Lb Dump Buggy (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
         

LOT #50 QTY = 2

Stainless Steel Meat Trucks (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #51 QTY = Lot

Lot Stainless Steel Elbows, 4" dia., Clamps, Caps, Wrench (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #52 QTY = 1

Stainless Steel Sink, foot pedal activated with knife sanitizer, Soap & Towel Dispenser (Required Rigging Fee: $30 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #53 QTY = 1

Regal Mdl. 562 Portable Lift, 110 volt on board charger (Required Rigging Fee: $30 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
       
         

LOT #54 QTY = 1

Pallet Jack (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

       
         

LOT #55 QTY = 1

Stainless Steel Continuous Oven, triple pass oven, 40” wide belt X approximately 70’ long tunnel with infeed/exit conveyors, 6” spacing between tiers, 3 heating zones with digital readout, Parker CTC Touchscreen (Required Rigging Fee: $33,250 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com) Oven is located on third floor. It will need to be dissessembled and removed through the wall with two cranes.

 
 
         
         
         
         
         
       
         

LOT #56 QTY = 1

Stainless Steel Z Conveyor, 9" W X 10' L plasatic belt, 12" between flights, 15" infeed, 64" discharge, 220 volts, 3 phase (Required Rigging Fee: $350 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #57 QTY = 1

EvoPak Stainless Steel Z Coveyor, 10" W X 9' L plastic belt, 12" between flights, 15" infeed, 8' discharge, 220 volts, 3 phase (Required Rigging Fee: $250 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #58 QTY = 1

IIshida Mdl. CCW-M-214W-S70-WP Stainless Steel 14-Bucket Scale, Mfg. 2004, Number 47118, Job #03/15104, 280/400/415/460/480 volts, 8" wide X 7" long buckets (Required Rigging Fee: $1,300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
       
         

LOT #59 QTY = 1

Eriez Mdl. T/G21E-250-30007 Drop Through Metal Detector, Ser. #21200227016, 10" Dia. aperture (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #60 QTY = 1

HMC Products Pouch Master Automatic Pouch Sealer, Mfg. 8/2004, Ser. #H2004187, digital heater, Allen Bradley Panel View 600 Touch Screen, 7' exit conveyor (Required Rigging Fee: $3,800 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com) Pouch sealer is located on the third floor. Will need to be removed through the wall with crane.

 
 
         
         
         
         
         
         
   
         

LOT #61 QTY = 1

Portable Urschel Mdl. J9-A Stainless Steel Dicer, Ser. #1246, 5 h.p., 230/460 volts, 3 phase (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #62 QTY = 1

Stainless Steel Meat Truck (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #63 QTY = 1

Stainless Steel Meat Truck (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #64 QTY = 1

Portable Stainless Steel Cart, 30" W X 40" L X 6" D (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #65 QTY = 1

Triarc Portable Aluminum Ladder, (5) stairs & platform, 24” wide x 7’ tall w/rails (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #66 QTY = 1

Hyster Pallet Jack (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #67 QTY = 1

Foremans Desk (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #68 QTY = 1

Stainless Steel Table, 19" W X 62" L (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #70 QTY = Lot

Lot (2) Electric Heaters, (1) Fan, (1) 2-Wheel Cart, (1) Johnson Bar (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #72 QTY = 1

Stainless Steel Electrical Cabinet, (5) AC Tech SCM Series Touchscreen Controls (Required Rigging Fee: $250 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #73 QTY = 1

Stainless Steel sink, foot pedal activated with knife sanitizer, soap & towel dispenser (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #74 QTY =

Stainless Steel Table, 28" W X 4' L X 31" T (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #75 QTY = 1

CAT PRRRR High Pressure Pump, stainless steel chemical holding tank (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #76 QTY = 1

CAT PRRRR High Pressure Pump, stainless steel chemical holding tank (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
       
         

LOT #77 QTY = 2

Werner 6' Fiberglass Ladders (1) on 1st floor - (1) on 2nd floor (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #78 QTY = 1

Crown Series E Walk Behind Forklift, Ser. #6A230889 (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #79 QTY = 2

Stainless Steel Dump Buggies, 400 Lb. capacity (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

       
         

LOT #80 QTY = 1

Stainless Steel Conveyor, 44" W X 16' L neoprene belt, drip pan, controls (Required Rigging Fee: $1,800 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com) Conveyor is on second floor. It is too long to fit in elevator. Will need to be cut and removed.

 
 
         

LOT #81 QTY = 1

Portable Stainless Steel Conveyor, 28" W X 151" L neoprene belt, Vari Drive on 3 phase motor (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #82 QTY = 1

Portable Stainless Steel Conveyor, 28" W X 151" L neoprene belt, Vari Drive on 3 phase motor (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #83 QTY = 1

Yale Type E Electric Pallet Jack, Ser. #B827N08394A, 24 volt (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #84 QTY = 1

Commercial Electric 24" Dia. Floor Fan (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

       
         

LOT #85 QTY = 1

Ariston Tankless Hot Water Heater (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #86 QTY = 1

Dynafluid Mdl. 2000 Liquid Flow Meter (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         
 
 
         

LOT #89 QTY = 2

Stainless Steel Dump Buggies, 600 Lb. capacity (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #90 QTY = 3

Stainless Steel Dump Buggies, 600 Lb. capacity (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #91 QTY = 2

Stainless Steel Dump Buggies, 600 Lb. capacity (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #92 QTY = 2

Stainless Steel Dump Buggies, 400 Lb. capacity (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #93 QTY = 2

Stainless Steel Dump Buggies, 400 Lb. capacity (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #94 QTY = 2

Stainless Steel Dump Buggies, 400 Lb. capacity (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #95 QTY = 2

Stainless Steel Dump Buggies, 400 Lb. capacity (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #96 QTY = 1

Abell-Howe 2-Ton 270" Turn 6' Long Jib Crane (Required Rigging Fee: $200 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #98 QTY = 1

Weg Motor, 208/230 volts, 1780 rpm, 404/5T frame, 100 h.p. (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
   
         

LOT #99 QTY = 1

Wolfking Mdl. C250UNI Stainless Steel Feed Screw & Barrel (New) (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #100 QTY = 1

Parker Accumulation Tank, 2' Dia. X 5' Tall, MAWP 200 PSI @450º F, MWMT 200 PSI @ 0º F, Mfg. 2015, National Board #802201 (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #101 QTY = 1

Accumulation Tank, 3' Dia. X 9' T MAWP, 165 PSI @ 400º F, MWMT 165 PSI @ -20º F, National Board #820184 (Required Rigging Fee: $150 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #102 QTY = 1

Accumulation Tank, 20" Dia. X 4' T MAWP, 150 PSI @ 450º F, MDMT -20º F @ 165 PSI , National Board #376800 (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #103 QTY = 1

Dominick Hunter Mdl. N2MAX10SWCE-CXE Maxi Gax Nitrogen Generator, Ser. #0200760, Computer No. 64 620 0814 (Required Rigging Fee: $250 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #104 QTY = 1

Dominick Hunter Mdl. MAXIPLUS 116 Nitrogen Generator, Ser. #06MP0008, Volume 420 liters (Required Rigging Fee: $250 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #108 QTY = 1

Stainless Steel Table, 3' W X 8' L X 34" T (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #109 QTY = 1

Battery Charger, 24 volt, 110 volts (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #110 QTY = 1

Sperian Eye Wash Station (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #111 QTY = 1

Stainless Steel Table, 34" W X 4' L X 31" T (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #112 QTY = 1

Lot Stainless Steel Sink, foot pedal activated, soap dispenser & towel dispenser (Required Rigging Fee: $50 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #113 QTY = 2

Stainless Steel Tanks with lid, 16" Dia. X 30" Deep (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #114 QTY = 2

Stainless Steel Tanks with lid, 16" Dia. X 30" Deep (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #115 QTY = 1

Stainless Steel Tank with lid, 16" Dia. X 30" Deep (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #116 QTY = 2

Rubbermaid Portable Spice Containers (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #117 QTY = 1

Stainless Steel Table, 3' W X 54" L X 30" T (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #118 QTY = Lot

Lot Rubbermaid Cart, Plastic Mop Bucket, (3) Aluminum Dunnage Racks, (3) Lockers & (7) Storage Racks (Required Rigging Fee: $150 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #119 QTY = Lot

Lot Bosh Tankless Water Heater & Kenmore Washing Machine (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #120 QTY = Lot

Stainless Steel Sinks, foot pedal activated, (3) Soap Dispensers & (2) Towel Dispensers (Required Rigging Fee: $45 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #124 QTY = 1

Frigidaire Window Air Conditioner (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #125 QTY = 2

Stainless Steel Chemical Foam Tanks (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #126 QTY = 1

Foam IT DS 3 Boot Foamer (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #127 QTY = 1

Stainless Steel Portable Cart, 30" W X 40" L X 6" D (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #128 QTY = Lot

Lot Stainless Steel Sink, knee pedal activated, (2) Soap Dispensers, (2) Towel Dispensers, Knife Sanitizer (Required Rigging Fee: $40 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #129 QTY = 1

CEM Automatic Extraction SystemCEM Automatic Extraction System (Required Rigging Fee: $45 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #130 QTY = 1

Frigidaire Window Air Conditioner (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #131 QTY = 1

Ariston Tankless Hot Water Hater (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #132 QTY = 1

Multivac Mdl. M855 FPO Rollstock Thermo Forming Packager, 12 1/4" between chains, Ser. #1002/110, Mfg. 1988, 220 volts, approx. 12" advance set up with 24 up meat stick die with outfeed conveyor (Required Rigging Fee: $3,000 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com) The packager is located on second floor. It will need to be removed through the wall with a crane.

         

LOT #133 QTY = 1

Stainless Steel sink, foot pedal activated with towel dispenser (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
 

LOT #134 QTY = 1

Water Fountain (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #136 QTY = Lot

Lot (1) Portable Stainless Steel Table, 24" W X 32" L X 39" T, (1) Portable Space Heater, (1) Locker, (1) File Cabinet, (1) Steel Table, (1) Desk, (2) Chairs (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
 
   
         

LOT #137 QTY = 1

Foremans Desk (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #139 QTY = 1

Stainless Steel Sink, foot pedal activated (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #140 QTY = 1

Werner 6' Fiberglass Ladder (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #141 QTY = 1

Rice Lake Inline Rail Scale with digital readout (Required Rigging Fee: $250 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
 

LOT #142 QTY = 1

Crown Mdl. 20MT Electric Walk Behind Forklift, 2000 Lb. capacity, Ser. #34556, 24 volt battery (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #143 QTY = 1

Small Stainless Steel Meat Truck (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #144 QTY = 1

Sperian Eye Wash Station (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #146 QTY = 1

Bosch Tankless Hot Water Heater (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #147 QTY = Lot

Sani-Lav Stainless Steel Sinks, foot pedal activated, soap dispensers, towel dispenser (Required Rigging Fee: $50 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #148 QTY = 1

Bosch Tankless Hot Water Heater (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #149 QTY = 1

Shop-Air 36" Dia. Floor Fan (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #150 QTY = Lot

Lot approx. 375' Stainless Steel Rail, Stainless Steel Hangars, Stainless Steel Switches, Stainless Steel I-Beam (Required Rigging Fee: $3,750 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com) The Stainless steel rail is located on 4th floor. It was installed in 12 foot sections.

 
 
         

LOT #151 QTY = 1

Dayton 36" Dia. Floor Fan (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #152 QTY = 5

24" Fans mounted to beams (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
       
         

LOT #153 QTY = Lot

Lot approx. 500' Steel/Galvanized Rail, Hangars, Switches, I-Beam (Required Rigging Fee: $5,000 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com) The rail is located on 3rd floor. It will be removed in 10 foot sections.

 
 
         
       
         
 

LOT #154 QTY = 1

Alpha-Laval Mdl. M10-MFG Expandable Heat Exchanger, Mfg. 2016, Ser. #30116-99600, -20º F @ 150 PSI MDMT, MAWP 150 PSI @354º F (Required Rigging Fee: $350 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #155 QTY = 1

Alpha-Laval Mdl. M6-MFG Expandable Heat Exchanger, Mfg. 2015, Ser. #30116-92915, -20º F @ 145 PSI MDMT, MAWP 145 PSI @354º F (Required Rigging Fee: $350 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #156 QTY = 1

Stainless Steel Sink, knee pedal activated, soap dispenser, towel dispenser (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #157 QTY = 1

Ariston Tankless Hot Water Heater (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #158 QTY = 1

COLMAC 2-Fan Evaporator, stainless steel coils (Required Rigging Fee: $3,000 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com) Evaporator is located on second floor and will need to removed through the wall with crane

 
 
         

LOT #159 QTY = 1

Evapco 4-Fan Evaporator, stainless steel coils (Required Rigging Fee: $3,000 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com) Evaporator is located on second floor and will need to removed through the wall with crane

 
 
         

LOT #160 QTY = 1

Doran Mdl. 7000XL Digital Scale, 10" W X 10" L top, 5 Lb. capacity, did not light up (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #161 QTY = 1

Dayton 36" Dia. Floor Fan (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #162 QTY = Lot

Lot approx. 3000' Steel Rail, Hangars, Switches, I-Beam (Required Rigging Fee: $3,000 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com) The rail is located on second floor.

 
 
         
 
 
         
 
 
         
 
 
         
 
 
         
 
 
         
 
 
         
 
 
         
       
         

LOT #163 QTY = 1

Vilter Mdl. 446 6-Cylinder Ammonia Compressor, Ser. #15233-AB-RC (Required Rigging Fee: $1,500 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #164 QTY = 1

Vilter Mdl. 446 6-Cylinder Ammonia Compressor, Ser. #15231-AB-RC (Required Rigging Fee: $1,500 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #165 QTY = 1

Vilter Mdl. 446 6-Cylinder Ammonia Compressor, Ser. #15231-AB-RC (Required Rigging Fee: $1,500 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
 

LOT #166 QTY = Lot

Koch Stainless Steel Sink, knee pedal activated (Required Rigging Fee: $45 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #167 QTY = 1

Koch Stainless Steel Sink, knee pedal activated (Required Rigging Fee: $45 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #168 QTY = 1

Stainless Steel Sink, foot pedal activated, (2) soap dispensers, towel dispenser (Required Rigging Fee: $45 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #169 QTY = 1

Ariston Tankless Hot Water Heater (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #170 QTY = 1

Lot of Stainless Steel Sink, foot pedal activated, soap dispenser & towel dispenser, Ariston Tankless Water Heater, Stainless Steel Table, Chemical Station Dispenser (Required Rigging Fee: $50 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #171 QTY = Lot

Lot Stainless Steel Sink, foot pedal activated, soap dispenser & towel dispenser, Ariston Tankless Water Heater, Stainless Steel Table, Chemical Station Dispenser (Required Rigging Fee: $50 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #173 QTY = 1

Stainless Steel Meat Truck, 30" W X 5' L (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #175 QTY = 1

Exide 12 Cell, 24 Volt Battery Charger (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #176 QTY = 1

Exide 12 Cell, 24 Volt Battery Charger (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #177 QTY = 1

Exide 12 Cell, 24 Volt Battery Charger (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #178 QTY = Lot

Lot Pallet Racking Drive In 5 pallets deep / 4 pallets deep, approx. 11' 6" tall upright , 23 spaces (Required Rigging Fee: $1,000 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
       
         

LOT #179 QTY = 1

Exide 12 Cell, 24 Volt Battery Charger (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #180 QTY = 1

Ferro Charger 18 Cell, 36 Volt Battery Charger (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #181 QTY = 1

Ferro Charger 18 Cell, 36 Volt Battery Charger (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #182 QTY = 1

Bug Zapper, 36" long (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #183 QTY = Lot

Lot (2) 2-Wheel Carts (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #184 QTY = Lot

Stainless Steel Vat, 48" W X 36" L X 36" T, (1) Stainless Steel Dump Buggy, 600 Lb. capacity, (1) Stainless Steel Dump Buggy, 400 Lb. (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #184A QTY =2

Stainless Steel Vats, 36" W X 48" L X 36" T (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
 

LOT #185 QTY = 1

Sperian Eye Wash Station (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
 

LOT #186 QTY = 1

Safeline Metal Detector, 21 1/4" W X 5 1/4" H aperture, 20" W X 4' L plastic belt conveyor (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #187 QTY = 1

Painted Steel Floor Scale, 5' X 5' platform, CNCell Mdl. PA8101S Digital Indicator (Required Rigging Fee: $450 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #188 QTY = 1

Vilter Mdl. VMC440 8-Cylinder Ammonia Compressor, 100 h.p. (Required Rigging Fee: $1,500 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #189 QTY = 1

Vilter Mdl. VMC440 8-Cylinder Ammonia Compressor, 100 h.p., Ser. #92344 (Required Rigging Fee: $1,500 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #190 QTY = 1

Vilter Mdl. VMC440 8-Cylinder Ammonia Compressor, 100 h.p., Ser. #R4814 (Required Rigging Fee: $1,500 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #191 QTY = 1

Vilter Mdl. VMC440 8-Cylinder Ammonia Compressor, 100 h.p., Ser. #32935 (Required Rigging Fee: $1,500 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #192 QTY = 1

Vilter Mdl. VMC450 XL 12-Cylinder Ammonia Compressor, 150 h.p., Ser. #83415 (Required Rigging Fee: $1,500 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #193 QTY = 1

Ammonia Accumulation Tank, 54" Dia. X 13' L (Required Rigging Fee: $2,200 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #194 QTY = 1

Sullivan Palatek Screw Air Compressor, 480 volts (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #195 QTY = 1

Sullivan Palatek Mdl. SPTX-1175A-436 Air Dryer, Mfg. 2013, 7 h.p. (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #196 QTY = 1

Accumulation Tank, 2' Dia. X 8' Tall (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #197 QTY = 1

Sullivan Palatek Screw Air Compressor (Required Rigging Fee: $400 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #198 QTY = 1

Iso Therm Mdl. VPR-2008 Ammonia Receiving Tank, Ser. #14080V, Mfg. 2014, shell 250 psi @ 200º F shell, MDMT -20º F @ 250 psi, approx. 2' dia. X 6' tall (Required Rigging Fee: $1,200 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #199 QTY = 1

Comp-Air Screw Air Compressor (Required Rigging Fee: $500 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #200 QTY = Lot

Lot (2) Antique Ammonia Gauges (Required Rigging Fee: $45 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #201 QTY = 1

Midwest Engineering & Equipment Co. Antique Ammonia Gauges (Required Rigging Fee: $45 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #202 QTY = 1

Hanson Mdl. AP16 Auto Purge, 115 volts, Ser. #14558 (Required Rigging Fee: $150 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #203 QTY = 1

Calibration Technologies Gas Guardian 6 Gas Detector (Required Rigging Fee: $45 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #204 QTY = 1

Acuumulation Tank, air, 3' Dia. X 11' Tall (Required Rigging Fee: $1,250 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #205 QTY = 3

Ammonia Receiving Tanks (Required Rigging Fee: $1,800 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #206 QTY = 1

Rostoria Space Heater, 115 volts (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #207 QTY = 1

Superior Boiler Works Mdl. 6-X1000, Ser. #15528, heating sq. surface 1028, 150 PSI, steam capacity 6000/hr., Mfg. 2004 (Required Rigging Fee: $3,500 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #208 QTY = 1

Holman Boiler, Mfg. 1988 (Required Rigging Fee: $3,500 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #209 QTY = 1

Bauer engineering, (3) pumps, (4) soft water tanks, poly tank 4' Dia. X 6' T (Required Rigging Fee: $1,000 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
 
   
         

LOT #210 QTY = Lot

Lot of approx. (930) 39" Stainless Steel Smoke Sticks in cardboard combo, 2208 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #211 QTY = Lot

Lot of approx. (950) 39" Stainless Steel Smoke Sticks in cardboard combo, 2236 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #212 QTY = Lot

Lot of approx. (740) 39" Stainless Steel Smoke Sticks in cardboard combo, 1956 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #213 QTY = Lot

Lot of approx. (740) 39" Stainless Steel Smoke Sticks in cardboard combo, 1956 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #214 QTY = Lot

Lot of approx. (900) 39" Stainless Steel Smoke Sticks in cardboard combo, 2132 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #215 QTY = Lot

Lot of approx. (690) 39" Stainless Steel Smoke Sticks in cardboard combo, 1641 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #216 QTY = Lot

Lot of approx. (910) 39" Stainless Steel Smoke Sticks in cardboard combo, 2150 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #217 QTY = Lot

Lot of approx. (335) 39" Stainless Steel Smoke Sticks in cardboard combo, 821 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #218 QTY = Lot

Lot of approx. (615) 39" Stainless Steel Smoke Sticks in cardboard combo, 1470 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #219 QTY = Lot

Lot of approx. (830) 39" Stainless Steel Smoke Sticks in cardboard combo, 1979 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #220 QTY = Lot

Lot of approx. (1400) 39" Stainless Steel Smoke Sticks, in stainless steel vat, 3520 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #221 QTY = Lot

Lot of approx. (1160) 39" Stainless Steel Smoke Sticks, in stainless steel vat, 2950 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #222 QTY = Lot

Lot of approx. (1180) 39" Stainless Steel Smoke Sticks, in stainless steel vat, 2945 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
 

LOT #223 QTY = Lot

Lot of approx. (1590) 39" Stainless Steel Smoke Sticks, in stainless steel vat, 3945 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #224 QTY = Lot

Lot of approx. (1380) 39" Stainless Steel Smoke Sticks, in stainless steel vat, 3457 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #225 QTY = Lot

Lot of approx. (1010) 39" Stainless Steel Smoke Sticks, in stainless steel vat, 2606 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #226 QTY = Lot

Lot of approx. (600) 39" Stainless Steel Smoke Sticks, in stainless steel vat, 1680 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #227 QTY = Lot

Lot of approx. (980) 39" Stainless Steel Smoke Sticks, in stainless steel vat, 2535 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #228 QTY = Lot

Lot of approx. (865) 39" Stainless Steel Smoke Sticks, in stainless steel vat, 2280 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #229 QTY = Lot

Lot of approx. (1000) 39" Stainless Steel Smoke Sticks, in stainless steel vat, 2580 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #230 QTY = Lot

Lot of approx. (1080) 39" Stainless Steel Smoke Sticks, in stainless steel vat, 2775 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #231 QTY = Lot

Lot of approx. (860) 39" Stainless Steel Smoke Sticks in cardboard combo, 2040 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #232 QTY = Lot

Lot of approx. (790) 39" Stainless Steel Smoke Sticks in cardboard combo, 1875 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #233 QTY = Lot

Lot of approx. (710) 39" Stainless Steel Smoke Sticks in cardboard combo, 1690 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #234 QTY = Lot

Lot of approx. (900) 39" Stainless Steel Smoke Sticks in cardboard combo, 2120 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #235 QTY = Lot

Lot of approx. (275) 39" Stainless Steel Smoke Sticks, in stainless steel vat, 920 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #237 QTY = Lot

Lot of approx. (800) 39" Stainless Steel Smoke Sticks in cardboard combo, 1900 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #238 QTY = Lot

Lot of approx. (800) 39" Stainless Steel Smoke Sticks in cardboard combo, 1900 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #239 QTY = Lot

Lot of approx. (1640) 39" Stainless Steel Smoke Sticks, in stainless steel vat, 4092 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #240 QTY = Lot

Lot of approx. (1650) 39" Stainless Steel Smoke Sticks, in stainless steel vat, 4105 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #241 QTY = Lot

Lot of approx. (1580) 39" Stainless Steel Smoke Sticks, in stainless steel vat, 3951 Lbs approx. weight (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #245 QTY = 1

Stainless Steel Carousel, 4' W X 4' L X 77" T, foot pedal activation (Required Rigging Fee: $50 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
       
         

LOT #246 QTY = 1

Stainless Steel Meat Truck (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #247 QTY = 6

Plastic Spice Totes (Required Rigging Fee: $30 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #248 QTY = 7

Plastic Spice Totes (Required Rigging Fee: $30 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #249 QTY = 1

Stainless Steel Cart with 39" smoke sticks/rods (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #250 QTY = 1

Stainless Steel Cart with 39" smoke sticks/rods (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #251 QTY = 1

Stainless Steel Cart with 39" smoke sticks/rods (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
 

LOT #252 QTY = 1

Stainless Steel Cart with 39" smoke sticks/rods (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #253 QTY = 1

Stainless Steel Meat Truck with 39" smoke sticks/rods (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #254 QTY = 1

Stainless Steel Cart with 39" smoke sticks/rods (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #255 QTY = 1

Stainless Steel Cart with 39" smoke sticks/rods (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #256 QTY = 1

Stainless Steel Cart (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #257 QTY = 1

Stainless Steel Cart (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #258 QTY = 1

Inline Rail/Scale with Flex Weigh Mdl. DWM-IV Readout (Required Rigging Fee: $250 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #259 QTY = 1

Stainless Steel Meat Truck (Required Rigging Fee: $10 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #260 QTY = 50

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #261 QTY = 50

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #262 QTY = 50

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #263 QTY = 50

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #264 QTY = 50

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #265 QTY = 50

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #266 QTY = 50

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #267 QTY = 50

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #268 QTY = 10

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #269 QTY = 10

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #270 QTY = 50

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #271 QTY = 50

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #272 QTY = 50

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #273 QTY = 50

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (do not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #274 QTY = 50

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #275 QTY = 50

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #276 QTY = 50

Stainless Steel Hanging Smoke Trucks, 39" W X 34" L X 44" T, 10 spaces for sticks, spaced 18" apart (does not include double trollies) (Required Rigging Fee: $300 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
         

LOT #277 QTY = 50

Stainless Steel Double Trollies (does not include smoke truck) (Required Rigging Fee: $150 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

         

LOT #278 QTY = 50

Stainless Steel Double Trollies (does not include smoke truck) (Required Rigging Fee: $150 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

         

LOT #279 QTY = 50

Stainless Steel Double Trollies (does not include smoke truck) (Required Rigging Fee: $150 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

         

LOT #280 QTY = 50

Stainless Steel Double Trollies (does not include smoke truck) (Required Rigging Fee: $150 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

         

LOT #281 QTY = 50

Stainless Steel Double Trollies (does not include smoke truck) (Required Rigging Fee: $150 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

         

LOT #282 QTY = 50

Stainless Steel Double Trollies (does not include smoke truck) (Required Rigging Fee: $150 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

         

LOT #283 QTY = 50

Stainless Steel Double Trollies (does not include smoke truck) (Required Rigging Fee: $150 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

         

LOT #284 QTY = 50

Stainless Steel Double Trollies (does not include smoke truck) (Required Rigging Fee: $150 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

         

LOT #361 QTY = 1

Colussi Ermes Mdl. L001-001 Stainless Steel Wash Cabinet, Ser. #3927, Mfg. 2002, Siemens touch screen controls, 7' W X 8' 6" T X 15' L, grated floor, spray bars both sides (Required Rigging Fee: $4,000 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com) Cabinet will need to be disassembled for removal

 
 
         
         
   
         

LOT #362 QTY = 2

Colussi Ermes Mdl. L009-001 Stainless Trollie Wash Cabinet, Ser. #5170102, 10' W X 7' L X 10' T (Required Rigging Fee: $4,000 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com) Cabinet will need to be disassembled for removal

 
 
         
         

LOT #363 QTY = 2

Stainless Steel Trolley Carts, 2' W X 7' L X 52" T (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #364 QTY = 1

Plastic Picnic Table, 8' L X 5' W, (2) benches (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #365 QTY = 1

Plastic Picnic Table, 8' L X 5' W, (2) benches (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #366 QTY = 1

Plastic Picnic Table, 8' L X 5' W, (2) benches (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #367 QTY = 1

Plastic Picnic Table, 8' L X 5' W, (2) benches (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #368 QTY = 1

Whirlpool Refrigerator/Freezer (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #369 QTY = 1

Stainless Steel Sink, knee pedal activated, soap dispenser, towel dispenser (Required Rigging Fee: $45 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #370 QTY = 1

Ariston Tankless Hot Water Heater (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #371 QTY = 1

Elkay Water Fountain (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #372 QTY = 1

Frigidaire Refrigerator/Freezer, ice maker with water dispenser (Required Rigging Fee: $50 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #373 QTY = 1

Frigidaire Electric Stove/Oven, 30" wide (Required Rigging Fee: $50 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #374 QTY = 1

Frigidaire Microwave Oven mounted over stove (Required Rigging Fee: $20 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #375 QTY = 1

Desk (no contents) (Required Rigging Fee: $50 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #376 QTY = 1

Conference Table, 4' W X 8' L with (5) chairs (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #377 QTY = 1

Desk, Table, (no contents) (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
   
         

LOT #378 QTY = 1

Desk, (no contents) (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #379 QTY = 1

Friedrich Window Air Conditioner (Required Rigging Fee: $25 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #380 QTY = 1

Desk, Table (no contents) (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #381 QTY = 1

Desk, (no contents) (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #382 QTY = 1

Desk, Table (no contents) (Required Rigging Fee: $75 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         

LOT #383 QTY = 2

Window Air Conditioners (Required Rigging Fee: $50 Contact Norm Pavlish at Nebraska Stainless Company 402-540-8843 or normpavlish@gmail.com)

 
 
         
 

Barliant
Auctions

Auction Calendar | Past Auctions | Mailing List | Appraisal Services | Contact Us

© 2013-2015, Barliant Auctions. All Rights Reserved
Barliant Auctions
518 Reimann Avenue
Sandwich, IL 60548
Phone: 815-570-2488
Fax:815-570-2541