Terms Highlights
To see Terms of Sale or Highlights of this auction, please click one of the links above. To search for a specific product, enter it in the search bar above. To review all lots association with this sale, just continue to page down.
                 
  Lot # 0 - 99   Lot # 100-199   Lot # 200-299   Lot # 300-399  
  Lot # 400-499   Lot # 500-599   Lot # 600-699   Lot # 701-800  
  Lot # 801-900              
                 

LOT #1 QTY = 1

Arctic Air Commercial Freezer, portable on casters, with Taylor Temperature Probe, overall size 75" T X 32" W X 29" D, 110 volt, 1 phase

 
 
         
         

LOT #2 QTY = 1

Arctic Air Commercial Refrigerator, portable on casters, with Taylor Temperature Probe, overall size 75" T X 32" W X 29" D, 110 volt, 1 phase

 
 
         
         

LOT #3 QTY = 1

True Mdl. TS-23 Stainless Steel Single Door Refrigerator, refrigerant R134A, Ser. #12002327, overall size 83 1/4" H X 27" W X 30" D, 110 volts, on casters

 
         
         

LOT #4 QTY = 1

True Mdl. TS-23F Stainless Steel Single Door Freezer, Ser. #11843815, refrigerant 404A, 110 volts, on casters (Tested Unit-Does Not Hold Temperature)

 
         
         

LOT #5 QTY = 1

Gemini Dough Rounder, Type CR-59 At #F591802 , Ser. #HEDO20000305, Mfg. 2013, 3 phase, 60 hertz, 480 volts

 
         
         

LOT #6 QTY = 1

Ash Equipment Company Batavia Dough Press

 
         
         

LOT #7 QTY = 1

Stainless Steel Table, 6' L X 30" W X 35" T

 
   
         

LOT #8 QTY = 1

Stainless Steel Table, 6' L X 30" W X 35" T

 
   
         

LOT #9 QTY = 1

Wolftech Polar Technology Mdl. N50 Injector, machine number 05055501, Ser. #05014297 Type AM50, 220/440 volts

         
         
         

LOT #10 QTY = 1

Select Technologies Vacuum Tumbler, Ser. #18325, 480 volts, 3 phase, PLC Controlled, approx. 6' L X 5' W drum

 
         
         

LOT #11 QTY = 1

Cozzini Mdl. CCD 485 Portable Bucket Lift, Ser. #P7450-08-26952, 92" dump height, 460 volts, 3 phase

 
         
         
         

LOT #12 QTY = 1

Stainless Steel Brine Tank with Admix Mixer, 30" diam X 33" deep, 230/460 volts, 3 phase

 
         
         

LOT #13 QTY = 1

Pump Mdl. 006-UI-RI-0, 24 Feb 16, Ser. #100000, 1 h.p., 230/460 volts, 3 phase

 
         
         

LOT #14 QTY = 1

Formax PFM-6 Patty Machine, 460 volts, 3 phase, 60 Hz, Ser. #136

 
 
         
         
         
         
 

LOT #15 QTY = 1

Formax Mdl. SC-6 S.S. Shuttle Conveyor, stainless steel, 7" W X 80" L s.s. belt, on wheels

 
         
         

LOT #16 QTY = 1

Enviromental Specialties Mdl. ES2000C-DM-DW-LX-S Incubator, double door, Ser. #0505252438, 208 single phase, temp rande -25º to 70º C, refrigerant 404A, 2 Lbs., with chart recorder and (2) PLC controls, 83" W X 3' W X 92" H on casters

 
 
         
         
         

LOT #17 QTY = 1

Enviromental Specialties Mdl. ES2000C-DM-DW-LX-S Incubator, double door, Ser. #0505252438, 208 single phase, temp rande -25º to 70º C, refrigerant 404A, 2 Lbs., with chart recorder and (2) PLC controls, 83" W X 3' W X 92" H on casters

 
 
         
         
         

LOT #18 QTY = 1

Bridge Mdl. S95 Patty Machine, Ser. #280-88-OU, 110 volts, 1 phase, missing front plate

 
         
         

LOT #19 QTY = 1

Protecon Systems Type PMT41 Double Roller Macerator, Ser. #189, 220 volts, 3 phase, machine #2503-83

 
         
         
         

LOT #20 QTY = 1

Gray Parts Rack, 4-shelves, , 32" W X 52" L X 68" T on wheels

 
         

LOT #21 QTY = 1

Stainless Steel Vat with cooling copper coil, 35 1/2" W X 46 1/2" L X 35" T

 

 
         

LOT #22 QTY = 1

Stainless Steel Vat with cooling copper coil, 35 1/2" W X 46 1/2" L X 35" T

 
 
         

LOT #23 QTY = 1

Stainless Steel Portable Auger Cart with chain

 
 
         

LOT #24 QTY = 1

Thern Inc. Mdl. M4042PBSS Stainless Steel Portable Cable Hoist, 1,000 Lb. capacity, on wheels, platform size 39 1/2" W X 34" L will go 82" H

 
 
         

LOT #25 QTY = 1

Waukesha Mdl. 030 Stainless Steel Pump, Ser. 3219554-98, 220/440 volts, 3 phase, portable on wheels, 1 h.p.

 
 
         
         

LOT #26 QTY = 1

Beseler Mdl. T-18-8-M Shrink Tunnel, Ser. #06930513, 220 volts, 1 phase

 
 
         

LOT #27 QTY = 1

Nationwide Fabrication Mdl. 3457-50 Refrigerated Prep Table, stainless steel, 3-door, 7-shelf, 80" L X 29" W X 3' H with 7" backsplash

 
 
         
         

LOT #28 QTY = 1

Stainless Steel Prep Table, 2-door, with sink, 66" L X 23" D work top, overall dimensions 83" L X 24" W X 36" T, with compressor

 
 
         
         

LOT #29 QTY = 1

Cheese Shredder, 110 volts

 
 
         

LOT #30 QTY = 1

Robot Coupe CL55 Series D Food Processor, no knives, 110 volts, 1 phase

 

 
         

LOT #31 QTY = 1

Stainless Steel Portable Mixing Bowl on wheels, removable bowl, 30" dia. X 12" deep bowl

 
   
         

LOT #32 QTY = 1

Toastmaster Bowl Chopper, 14 1/2" bowl dia., 2 blades, 110 volts, runs good

 
 
         

LOT #33 QTY = 1

FES Mdl. 16S Ammonia Screw Compressor, 200 h.p., Ser. #94012132, 440 volts, 3 phase, 60 cycle, installed & working in catfish plant approximately 24 months ago, owners reported no issues, stored in dry storage since removal-Located in Center, TX

 
 
         
         

LOT #34 QTY = 1

FES Mdl. 16S Ammonia Screw Compressor, 200 h.p., Ser. #94012133, 440 volts, 3 phase, 60 cycle, installed & working in catfish plant approximately 24 months ago, -stored in dry storage since removal-Located in Center, TX

 
 
         
         
         
         

LOT #35 QTY = 1

M&M Mdl. A65HT Ammonia Screw Compressor, 300 h.p., Ser. # 99M-112-0200A, 440 volts, 3 phase, 60 cycle, installed & working in plant 18 months ago, owners reported no issues-stored in dry storage since removal-Located in Center, TX

 
 
         
         
         
       
         

LOT #36 QTY = 1

M&M Mdl. A65HT Ammonia Screw Compressor, 300 h.p., Ser. # 99M-112-0200B, 440 volts, 3 phase, 60 cycle, installed & working in cold storage application, removed 18 months ago, owners reported no issues-stored in dry storage since removal-Located in Center, TX

 
 
         
         
         

LOT #37 QTY = 1

Dual Frick Screw Mdl. RWB II 100 Compressor Package, (2) 250 h.p. Frick screw compressors mounted on skid, (4) Ram electrical starters for the 2 dual units, (2) starters go with each screw compressor packager, used Freon but will operate on ammonia, well maintained, no service issues reported, thermosyphon cooling & thermosyphon vessel included **Located in Dallas, Texas
****** $750.00 Required Loading Fee******

 
 
         
         
         
         

LOT #38 QTY = 1

Dual Frick Screw Mdl. RWB II 100 Compressor Package, (2) 250 h.p. Frick screw compressors mounted on skid, (4) Ram electrical starters for the 2 dual units, (2) starters go with each screw compressor packager, used Freon but will operate on ammonia, well maintained, no service issues reported, thermosyphon cooling & thermosyphon vessel included **Located in Dallas, Texas
****** $750.00 Required Loading Fee******

 
 
         
         

LOT #39 QTY = 1

Frick High Pressure Receivers, ammonia or freon, 36" diameter x 15' long **Located in Dallas, Texas
****** $350.00 Required Loading Fee******

 
         

LOT #40 QTY = 1

Frick High Pressure Receivers, ammonia or freon, 36" diameter x 15' long **Located in Dallas, Texas
****** $350.00 Required Loading Fee******

 
 
         

LOT #41 QTY = 1

Evapco Mdl. SSTL1-02150-4 Evaporator, stainless steel single fan, ammonia coil, 48" dia. fan, 3 h.p., 230/460 volt fan motor, design pressure 250 PSIG

 
 
         
         

LOT #42 QTY = 1

Carter-Hoffman Mdl PH-18360V Portable Heating/Holding Cabinet, 16 pan capacity, 2' W X30" D X 63" T, 110 vp;ts

 
 
         

LOT #43 QTY = 1

Royal Gas Fired Grill/Oven, 36" Wide X 21" Deep grill area

 
         

LOT #44 QTY = 1

Groen Mdl. CFPC-3 Electric Braising Pan/Tilt Skillet, 24" W X 32" L X6" D pan

 
         

LOT #45 QTY = 1

Cozzini Mdl. HEM-02 Sterilizing Stainless Steel Sanitizer/Bacteria Reduction System Wash Cabinet, (13) knife racks inside 43" L X 24" D X 26" H cabinet, (1) stainless steel basket for mesh gloves, metal aprons, slicing blades, etc., digital controls

 
         
         

LOT #46 QTY = 1

KLS-100 S.S. Gas Fired Self-Contained Kettle, Ser. #030911S5029-1174

 
         

LOT #47 QTY = 1

Magi Kitchin Gas Fired Grill, 32" W X 24" D grilling area

 
         

LOT #48 QTY = 1

Mettler-Toledo Mdl. Lynx Portable Digital Scale, 60 Kg X 0.02 capacity, 16" Wide X 24" Long roller conveyor top

       
         

LOT #49 QTY = 1

Stainless Steel Sink, 18" Wide X 36 Long, 3 bowls, single faucet

 
         

LOT #50 QTY = Lot

(4) Aluminum Bakers Racks, (2) 16" Wide X 26" Long, 7 spaces , (1) 14" Wide X 22" Long, 19 spaces, (1) 16 Wide X 26" Long, 16 spaces

 
   
         

LOT #51 QTY = 2

(2) Berkel Deli Slicers

 
         
         

LOT #52 QTY = 1

Stainless Steel Mold Tower, (16) 5" Dia. X 18" L round screen

 
         

LOT #53 QTY = 1

Stainless Steel Mold Tower, 21 rectangle molds, 12" W X 34" L X 4" D

 
   
         

LOT #54 QTY = 1

Stainless Steel Mold Tower, 72 round screen molds, 4" Dia. X 18" L

 
   
         

LOT #55 QTY = 1

Stainless Steel Mold Tower, (24) plates of 21 up 4" Dia. X 3" D cups

 
   
         

LOT #56 QTY = 1

Hobart Mdl. 4356 Mixer Grinder, 500 Lb. capacity, powder coated frame, 15 h.p. & 5 h.p. motors

 
 
         
         
   
         

LOT #57 QTY = 1

Hobart Mdl. 4356 Mixer Grinder, 500 Lb. capacity, 15 h.p. & 5 h.p. motors

 
 
         
 
         
         

LOT #58 QTY = 1

Hobart Mdl. 90-56A Vertical Screw Conveyor, Ser. #27-3027-148

 
 
         

LOT #59 QTY = 1

Anco Mdl. 1411 Bacon Press, Data Instruments Shadow V Light Curtain, Ser. #935291

 
 
         
         
         
         

LOT #60 QTY = 1

Anco Mdl. 1411 Parts, Hydraulic Hoses, Main Cylinder, Valves, Switches, Coupling, Cylinder Service Kits, etc.

 
 
         
         
         

LOT #61 QTY = 1

Vemag Hopper 40" Dia. X 27" D

 
   
         

LOT #62 QTY = 1

Heat & Seal Table Top Hot Plate Overwrapper (new in box)

 
 
         

LOT #63 QTY = 1

Tor-Rey Table Top Meat Grinder

 
 
         
       
         

LOT #64 QTY = 1

Hobart Mdl. LXER Dishwasher, hot water sanitizing machine, under counter

 
 
         
       
         

LOT #65 QTY =

Hobart Mdl. LXER Dishwasher, hot water sanitizing machine, under counter

 
 
         
       
         

LOT #66 QTY =

Ajax Mdl. B7G Indoor Gas Fired Water Boiler, Max BTU/Hr 700,000, max output 560,000 BTU/hr., heating surface: 100, min relief valve cap: 700, 120 volts, single phase

 
 
         
       
         

LOT #67 QTY = 1

Baker Model B30.TE.S Forklift, Triple mast, side shift, 36 volt battery, Ser. #324.403.5096.15, with Enersys 36 Volt Battery Charger, forklift lights up and attachments function but does not engage to move forward or backwards, battery was replaced in 2016 and has been in storage since.

 
 
         
         

LOT #68 QTY = 1

Delfield Mdl. 448N-18M Salad Prep Table, Portable Refrigerated Mega Top Salad Prep Table/Cooler, 2 sections, 120 volts

 

 
 
         

LOT #69 QTY = 1

Tri-Flow Centrifugal Pump, 10 h.p., 230/460 volt motor, 3" inlet, 4" outlet

 
 
         

LOT #70 QTY = 1

Stainless Steel Table with 12" shelf and drawer under shelf, lighting, overall size 36" W X 8' L X 36" H with 12" backsplash

 
 
         

LOT #71 QTY = 1

Stainless Steel Dump Buggy, 400 LB capacity

 
 
         

LOT #72 QTY = 1

Video Jet Mdl. Excel/170AF Coder on cart

 
 
         
         

LOT #73 QTY = 1

Hajek Mdl TA20L Rollstock Packager, 20 MM between chains, setup with 2 up die, approximately 290 mm wide X 190 mm long, film advance approximately 200 mm, manual controls, Busch Type 160-132 vacuum pump, 220 volts, 3 phase, all guards, (2) rails, additional die 290mm wide X 230 mm long, filler plates, etc

 
 
         
         
         
         
         
         
         
         

LOT #74 QTY = 1

Rheon Mdl. KN300 Cornucopia Encrusting Machine, 220 volts, 3 phase

 
 
         
         
       
         

LOT #75 QTY = 1

Lowe Mdl. ML-13-BLX-2 Refrigerated Merchandizer, with screen, 51" W X 75" T X 30" D

 
   
         

LOT #76 QTY = 1

Hollymatic Mdl GMG180A Mixer/Grinder, 230 volts, 3 phase

 
 
         
         

LOT #77 QTY = 1

Stainless Steel Centrifugal Pump, on s.s. cart, 1 1/2" inlet/outlet, on 5 h.p. s.s. 208/230/460 volt motor, w/starter box

 
 
         
       
         

LOT #78 QTY = 1

Stainless Steel Additive Tank, 24" Dia. tapers to 2" butterfly valve bottom outlet, 24" deep, Missing Pump

 
 
         
       
         

LOT #79 QTY = 1

Parts Washer, plastic construction, 2' W X 5' L X 4' T, w/1" piping, centrifugal pump

 
         
       
         

LOT #80 QTY = 1

Groen Mdl. DEE-60SP Self-Contained Jacketed Kettle, 60 gallon capacity, tilt out bowl, electric fired

 
 
         

LOT #81 QTY = 1

Stainless Steel Frame 90º Conveyor, 44" W X 7' L s.s. belt, electric drive SOLD

 
 
         

LOT #82 QTY = 2

Stainless Steel Stackable Vats, 36" wide X 45" long X 36" deep

 
   
         

LOT #83 QTY = 2

Stainless Steel Stackable Vats, 36" wide X 45" long X 36" deep

 
 
         

LOT #84 QTY = 2

Stainless Steel Stackable Vats, 36" wide X 45" long X 36" deep

       
         

LOT #85 QTY = 2

Stainless Steel Stackable Vats, 36" wide X 45" long X 36" deep

 
   
         

LOT #86 QTY = 1

Fomaco Mdl. FGM6438/384 DW Double Head Injector, missing one head, 128 needles, walking beam conveyor, 21 1/2" W X 9' L, s.s. brine tank with roto-fliter & screens, Ser. #6278, mfg. 1995

 
 
         
         
         
 
         
         

LOT #87 QTY = 1

Sizxiajin Mdl ZS88 Pickle Injector, single head, 88 needles, 22" W X 5' L s.s. belt conveyor, Ser. #2011015D0830DB102, 240 volts

 
 
         
 
         

LOT #88 QTY = 1

Kramer-Grebe Mdl. 3000/350 Rollstock Thermoforming Packager, 350mm between chains, setup w/1 up die, 305 mm Wide X 205mm Long, analog controls with push buttons, vacuum pump

 
 
         
         
         
         
         
         
       
         

LOT #89 QTY = 1

AM Manufacturing Mdl. RK2100 Gemini Bagel Divider with Mdl. BF100 bagel forming conveyor, Ser #1188 (divider) & F319 (former) 220 volts

 
 
         
 
 
         
         

LOT #90 QTY = 1

Univex Mdl. M-60 Planetary Mixer, Ser. #60171

 
 
         

LOT #91 QTY = 1

Heavy Duty Dock Plate with curbs, 5' long X 53" wide driving area, 68" wide overall

 
 
         

LOT #92 QTY = Lot

(2) Condor Durable IBC Tank Spill Containment Units, 1-pc. molded, polyethylene, won't rust, dent, or corrode while providing an economical spill containment solution, unit is forkliftable & nestable, 385 gallon spill capacity, 72” wide X 84” long X 26” deep

 
 
         

LOT #93 QTY = 4

Cambro Mfg. Plastic Dunnage Racks, 21" wide X 4' long X 12" tall

 
 
         

LOT #94 QTY = 1

Bonar Plastics Mdl. #2090 Portable Ingredient Bin, 20" wide X 34" long X 28" deep, bottom drain

 
 
         

LOT #95 QTY = Lot

(2) SEW-Eurodrive Motors/Gearboxes, motor type DFT71D4KS, TEFCSP, 230/460 volts, 60 hertz, 2.00/1.00 A, code: M, conn. dia. DT79, .5 h.p., SF 1.0, duty cont. design letter B, Gearbox type SAF47CT71D4-KS, In: CT-300-1000 RPM, Out: 10-62 RPM, torque: 442, ratio: 29.00, SF 3.1

 
 
         
         

LOT #96 QTY = Lot

(1) Nord Motor Gearbox, motor type 71S/4, 3 phase, No. 32219322/9922, frame 71S, IEC 38 NEMA, 230/460 volts, 1.56/0.78 amp, 0.25 KW, .034 h.p., 0.54PF 60 hz, 1710 RPM, Ser. F1,15, ENCL TEFC DP, Ins. CLF, Gearbox SK1872 AF-71 S/4, ratio 12.33, s.f torque 168 IN-LB, RPM 137, Mtg POS H2 & (1) Siemens/Nord Motor/Gearbox, motor type 1L-A50704BB92, Frame 71, No. EL187698901001, Const. B14, IP 55, 230/460 volts, 1.5/0.75 amp, 0.25 kw, Ser. F.1.15, 0.70 PF Ins. CL:F, 60 hz, 1695 rpm, ENCL.TE 0.34 h.p., Gearbox SK1532AF S/4, ratio 12.33 sf, torque 188 in Lb. of speed 137 RPM, Mtg pos H2

 
 
         
         

LOT #97 QTY = Lot

(1) Baldor/Shinko Motor/Gearbox, motor cat VWDM3538, Spec 35H828-1802, frame 56c, Ser. F. 192, H.P. 1/2 TE, 208/230/46- volts, 1.8 amps, 1.6/.8, rpm 1725, 60 hz, 3 phase, Ser. F.1.25, Gearbox type WICHS, size 60, 1/60 ratio, mfg. #911227 & (1) Leeson/Shinko Motor/Gearbox, motor type N6T17WKID, cat 112429.00, 60/50 hz, 1725/1425 rpm, 1/2 h.p., 3 phase, 208/230/460 volts, frame C56C, duty cont., Gearbox type WICHS Size 60, 1/60 ratio, mfg. #937225

 
 
         
         

LOT #98 QTY = 1

New Leeson Mdl. C6734VCID Motor, cat 11302200, 3 phase, 3/4 h.p., 3450 rpm, 208/230/460 volts, 60 hz, frame C56C, mounting C face, enclosure TENV, duty cont.

 
 
         
         

LOT #99 QTY = 1

New Electra-Gear Gearbox Frame 17PHSC5, S.O. 97E15312JG001, ratio 20:1

 
 
         
         

LOT #100 QTY = 1

New Baldor Motor, 3 h.p., TE, 1450 rpm, ENC, TENV frame 184 TC, 3 phase, 50 hz, 208/380/440 volts

 
 
         
       
         

LOT #101 QTY = Lot

(2) Baldor Motors, cat. No. VWDM3542, spec: 35S603-1884G1, 3/4 h.p., 230/460 volts, 2.2/1.1 amps, 1725 rpm, frame 56C, 60 hz, 3 phase, ser. F:1.25, Code J, DES 8 Class F, rating 40º C AMB-CONT.

 
 
         
         

LOT #102 QTY = Lot

(1) Nord Type 5K 71 S/4, 3 phase M, frame 71, EN60034, IEC 38, NEMA, 230/460 volts, 1.56/0.78 A, 0.25 KW, 0.34 h.p., 0/64 pf, 60 hz, 1/10 rpm, Ser. #F1.15, AMB 40º C, TEFC, DP, INS CL F, ratio: 12.33, max torque 168 in lbs., 137 rpm, mtg. pos. H2, .600 hole, (1) Nord Motor/Gearbox: motor type SK71S/4K6, No. 8002423739, S:1, frame 71S, NEMA, 230/460 volts, 1.56/0.78 A, 0.25 KW, 0.33 h.p., 1710 rpm, 0.64 pf, amb 40º C, 60 hz, DP, INC, CLF, Ser. F1.15, ENCL. TEFC code letter J, Gearbox: SK1532AF-71 5/4 KB, ratio 12.33, torque 00177 in lb., rpm:139, mtg pos: HZ/B4 & (1) Nord Motor/Gearbox, motor type SK71 S/4 KB, No. 8002423740 S:1, Frame 71S, NEMA, 230/460 volts, 1.56/.078A, .025 KW, .33 h.p., rpm 1710, 0.64 pf, Amb 40º C, 60 hertz, DP INS CLF, SER. F, ENCL. TEFC, Code Letter: J, Gearbox: SK15322AF-71 5/4 KB, ratio 12.33, torque: 00177 In Lb., RPM:139, POS:H2 H4

 
 
         
         
         

LOT #103 QTY = Lot

(2) SEW/Eurodrive Motors/Gearboxes, motor type DFY71LTH, IP 65, T Stall 66.4 Lb- In, I-Stall 9.6, Imax 230 volts, 1 Max 28.8 A, Ins. Class F, N Max 3000 RPM, F Max 150 hz, AMB 40º C, Gearbox: KAF37DY71LTH, 3000 rpm, output 337 RPM, torque 591 Lbs. in ratio 8.91, SVC FAC 2.4, mounting pos. M1B, 1.25 in. hole

 
 
         
         
         

LOT #104 QTY = 1

NORD MTR 80S/4 CUSKD No: 8008456446.00 WNK, 3 phase, NEMA SF1.15 duty cont, IP 55, Ins. F, PF 0.71, FR 080, AMB 40º C, ENCL TEFC, DP Code F, 0.75 h.p., 0.55 KW, 1710 rpm, 60 hz, 230/460 volts, 2.70/1.35 A, 1.0125 dia. shaft, ratio 40:1, torque 00681 Lb/In. speed rpm 43, M1MTG POS

 
 
         

LOT #105 QTY = Lot

(2) Baldor Gearboxes, ratings @ 1750 rpm input, max h.p. input .842, ratio: 30:1, torque 691 in lbs., ID:WDHF-921-30-B5-H104

 
 
         
         

LOT #106 QTY = Lot

(1) Maxi-Torq Mdl. 6Z820 Permanent Split Capacitor Gear Motor, 115/230 volts, 50/60 hz, h.p. 1/6-1/7, SF.10., torque 157 in lbs., ratio 28:1, 2.3/1.2 amps, 2.8/1.5 AMB 40º C, 1 phase, INC Class B, Duty Cont, Ref No. 151-500-8041, .625 dia. shaft & (1) NORD Motor/Gearbox Type SK 71S/4KB, 3 PH, No. 8002423739, S1 frame 71S, NEMA 230/460 volts, .025 KW, 1.56/078A, 0.33 h.p., 0.64 PF, AMB 40º C, 60 hz, Dp Ins. CL:F, Ser. F1.15, ENCL.TEFC, code letter J, Gearbox SK1532AF-71 S/4 KB, ratio 12.44, SF, torque in-lb., 139 rpm, mtg. pos N2/M4

 
 
         
         
         

LOT #107 QTY = Lot

(1) Nord MTR 63L/4CUS IP66KBO, No. 800941338300 WNK, 3 phase, SF 1.15, duty cont. IP 66, In S:F, PF 0.71., FR 063, AMB 40º C, ENCL.TECF, DP Code: E, 0.25 h.p., 0.18 KW, 1680 rpm, 60 hz, 230/460 volts, 1.12/0.56 A, 0.750 hole, (1) NORD Motor/Gearbox, motor type: 71 S4CUSKD No: 800845643400, 3 phase, INS: F, SF 1.15 NEMA, Duty: Cont. IP:55 PF 0.64, FR 071, AMB 40º C ENCL TEFC, DP Code G, 0.33 h.p., 0.25 KW, rpm 1710, 60 hz, 230/460 volts, 1.56/0.76 A, Gearbox: SK15M50AF-71 S/4 CUSKD, ratio 25.0, torque 00230 lb.-in speed 68 rpm, Mtg. Pos. M2 & (1) NORD Motor/Gearbox, motor type: 71 L4CUSKD No: 800845579300WNK, 3 phase, INS: F, SF 1.15 NEMA, Duty: Cont. IP:55 PF 0.69, FR 071, AMB 40º C ENCL TEFC, DP Code F, 0.50 h.p., 0.37 KW, rpm 1720, 60 hz, 230/460 volts, 1.90/0.95 A, Gerbox: SK15M50AX-71 L/4 CUSKD, ratio 40.0, torque 00451 lb.-in speed 43, Mtg. Pos.M1

 
 
         
         
         

LOT #108 QTY = 1

Motor/Gearbox Type Baldor, spec 36H799Y781G1, frame 184 TC, SER F599 HP 3 TE, 220/380/440 volts, Mac Cur 2.2, FLA: 8.4/4.9/4.2, 1450 rpm, 50 hz, 3 phase, class H, Gearbox: HG3NJIND NEMA 184, ratio: 135.05/1, torque: 400NMB5

 
 
         
       
         

LOT #109 QTY = 1

Ishida Mdl DACS-GN Inline Checkweigher, 12" W X 36" L weighing area (missing belt)

 
 
         
         

LOT #110 QTY = 1

Rytec Doors Electric Rollup Door, 11’ Wide stainless steel frame, 9’ Wide flexible rollup door, drive motor, gearbox and controls panel, Ser. #713582  

 
 
         
       
         

LOT #111 QTY = 1

Air Hydraulics Mdl J10842 Power Pack Reservoir, 200 gallon capacity, 36” W X 6’ L X 29” D

 
 
         
         
         

LOT #112 QTY =

New Equipment Arriving Daily-Much More To Come- Keep Checkin Back

   
 
         
 

Barliant
Auctions

Auction Calendar | Past Auctions | Mailing List | Appraisal Services | Contact Us

© 2013-2015, Barliant Auctions. All Rights Reserved
Barliant Auctions
518 Reimann Avenue
Sandwich, IL 60548
Phone: 815-570-2488
Fax:815-570-2541